$ 5,550.00
All MCS damper kits are built to order so expect an estimated 2-4 week build time after you order. If you chose to order online, you will be billed immediately....
$ 3,940.00
All MCS damper kits are built to order so expect an estimated 2-4 week build time after you order. If you chose to order online, you will be billed immediately....
$ 3,800.00
All MCS damper kits are built to order so expect an estimated 2-4 week build time after you order. If you chose to order online, you will be billed immediately....
$ 4,125.00
Introduction Vorshlag Motorsports is proud to offer the Ohlins Dedicated Coilovers. The Dedicated series of monotube dampers has the quality, technology, and performance we look for here at Vorshlag, we...
$ 3,190.00
Introduction Vorshlag Motorsports is proud to offer the full line of Ohlins Road & Track Coilovers. The Road & Track series of monotube dampers has the quality, technology, and performance...
$ 3,090.00
All MCS damper kits are built to order so expect an estimated 2-4 week build time after you order. If you chose to order online, you will be billed immediately....
$ 2,950.00
All MCS damper kits are built to order so expect an estimated 2-4 week build time after you order. If you chose to order online, you will be billed immediately....
$ 3,970.00
Introduction Vorshlag Motorsports is proud to offer the full line of Ohlins Road & Track Coilovers. The Road & Track series of monotube dampers has the quality, technology, and performance...
$ 2,690.00
Introduction Vorshlag Motorsports is proud to offer the full line of Ohlins Road & Track Coilovers. The Road & Track series of monotube dampers has the quality, technology, and performance...
$ 899.00
The factory stock non-M arms are made from sheetmetal that is merely spot welded together, which tends to flex and bend under moderate loads let alone track day or racing...
$ 899.00
The factory stock rear wishbones on the E9X come curved from the factory causing them to be prone to flexing under moderate loads let alone track day or racing stresses....
$ 799.00
SPL Parts "Race Version" front lower control arms provide roll center, camber and track width adjustment for the E9X and E8X BMWs and allow for full articulation with the proper...
$ 699.00
SPL Parts Titanium Series tension rods provide a wide range of front caster adjustment, allowing precise alignment for optimal turn-in response and to compensate for variances between left and right...
$ 635.00
This catalog entry is for Vorshlag camber/caster plates designed to fit the BMW E90 M3 Sedan, E92 M3 Coupe, E93 M3 Convertible, and E82 1M Coupe. This camber plate can...
$ 635.00
Easily adjust camber trackside with Vorshlag camber/caster plates. Oversized spherical bearings are designed to withstand the rigors of street and track abuse. All components are plated for maximum corrosion resistance...
$ 525.00
Easily adjust camber trackside with Vorshlag camber/caster plates. Oversized spherical bearings are designed to withstand the rigors of street and track abuse. All components are plated for maximum corrosion resistance...
$ 459.00
SPL Parts front caster rod bushings replace the stock flexible rubber bushings with low friction articulating spherical bearings eliminating bushing deflection and reducing friction. This maintains optimum suspension geometry under...
$ 449.00
SPL Parts Titanium Series rear toe arms increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for...
$ 379.00
SPL Parts front tie rod ends allow the tie rod end pivot to be relocated, which will correct bumpsteer resulting from modified caster or lower arm geometry, thus reducing lap...
$ 330.88
Vorshlag is an Authorized dealer for Whiteline products and we are now offering some exciting new parts for the 5th generation Camaro chassis. This Whiteline 27mm 3 point adjustable sway...
$ 249.00
SPL Parts PRO Series Rear Endlinks (RE) for the BMW E9X and E8X chassis feature massive Teflon lined FK 1/2" Bearings to provide the highest load capacity for use with...
$ 249.00
SPL Parts PRO front endlinks for the BMW E9X/E8X chassis feature massive Teflon lined FK 1/2" bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. ...
$ 227.50
60mm Tenders and Helpers Spring Name and Rate Extended Height Compressed Height Eibach 60mm Tender 114 lbs/in 3.07" 1.10" Eibach 60mm Tender 171 lbs/in 3.58" 1.50" Eibach 60mm Tender 229...
$ 165.88
The E8x and E9x comes with non-adjustable end links. If you lower your BMW with lowering springs or coilovers, adding adjustable end links allows you to remove preload from your...