C5 / C6 Corvette Suspension

MCS RR2 Remote Double Adjustable Monotube Dampers (C5/C6 Corvette)

$ 5,790.00

All MCS damper kits are built to order so expect an estimated 2-6 week build time after you order. If you chose to order online, you will be billed immediately....

View full product details »

MCS TT2 Internal Double Adjustable Monotube Dampers (C5/C6 Corvette)

$ 4,440.00

All MCS damper kits are built to order so expect an estimated 2-6 week build time after you order. If you chose to order online, you will be billed immediately....

View full product details »

MCS TT1 Internal Single Adjustable Monotube Dampers (C5/C6 Corvette)

$ 3,230.00

All MCS damper kits are built to order so expect an estimated 2-6 week build time after you order. If you chose to order online, you will be billed immediately....

View full product details »

Vorshlag Spherical Rear Shock Mounts (C5/C6)

$ 299.00

Vorshlag Spherical Rear Shock Mounts for the Corvette C5 and C6 chassis We designed and built our first prototype set of spherical upper shock mounts for the C5/C5 chassis back...

View full product details »

Vorshlag Spherical Front Shock Mounts (C5/C6)

$ 349.00

Vorshlag Spherical Front Shock Mounts for the Corvette C5 and C6 chassis NOTE: These spherical shock mounts fit "pin" upper shocks (not race-only "eye" conversion) for the front of all...

View full product details »

PFADT aFe C6 Corvette Swaybars

$ 2,090.61

aFe Control is proud to introduce the PFADT Series Heavy Rate Racing Sway Bars for the 05-13 C6 Corvette. The PFADT Series Racing Sway Bars are designed for those that...

View full product details »

PFADT aFe C5/C6 Corvette Rear Lower Shock Spherical Bushing

$ 322.00

These are out of stock with no expected shipping date. aFe Control is proud to release the PFADT Series Rear Shock Spherical Bearing Kit for the 97-13 Corvette. OE factory...

View full product details »

PFADT aFe C5 Corvette Swaybars

$ 2,090.61

aFe Control is proud to introduce the PFADT Series Heavy Rate Racing Sway Bars for the 97-04 C5 Corvette. The PFADT Series Racing Sway Bars are designed for those that...

View full product details »

PFADT aFe C5/C6 Corvette Front and Rear Swaybar Pillowblock Upgrade

$ 493.15

aFe Control is proud to introduce the PFADT Series Racing Sway Bar Pillow Mounts for the 1997-2013 C5 & C6 Corvette. These 6061-T6 pillow block bushing mounts are designed to...

View full product details »

Vorshlag 68-75mm Spanner Wrenches for MCS and Moton Dampers (pair)

$ 50.00

Vorshlag 68-75mm Spanner Wrenches for MCS and Moton Dampers (pair) This is a PAIR of spanner wrenches used for tightening the locking collars and lower spring perches on Moton Clubsport...

View full product details »

C6 Corvette - Rear Tie Down Loop Kit (pair)

$ 59.95

Introduction We learned this trick a decade ago on our S197 Mustang - strapping cars down through the wheels sucks - it is time consuming, can scratch the wheels with...

View full product details »

PFADT aFe C5/C6 Corvette Poly Control Arm Bushing Kit

$ 617.01

aFe Control is proud to release the PFADT Series, Poly Control Arm Bushing Kit, for the C5 & C6 Corvette. OE factory bushings are known to deflect more than a...

View full product details »

MCS ASM Spring Perch and Lock Ring Wrenches (pair)

$ 46.00

Motion Control Suspension Wrenches for Spring Perches and Lock Rings (pair) This is a PAIR of pin wrenches used for tightening the locking collars and lower spring perches on Motion...

View full product details »

SPL PARTS - Bumpsteer Adjustable Front And Rear Tie Rod Ends, C5 C6 Corvette

$ 349.00

SPL Parts front tie rod end kits allows the outer tie rod end pivot to be relocated, which can be used to correct bumpsteer resulting from modified caster or arm...

View full product details »

MCS Remote Reservoir Mounts

$ 27.00

Motion Control Suspension Mounts For Remote Reservoir (single) This is a single set of parts used for mounting the remote reservoirs of Motion Control Suspension shocks and struts. It is...

View full product details »

MCS Nitrogen Fill Tool and Gauge

$ 148.00

Motion Control Suspension Shock Pressure Gauge and Nitrogen Fill Tool This is a tool used to check the nitrogen pressure of MCS dampers. Along with a nitrogen rig it can...

View full product details »

MCS Jam Nuts

$ 6.00

Motion Control Suspension Replacement Jam Nuts These are the jam nuts MCS uses to secure their pin style strut and shock shafts to top mounts. If you need a set,...

View full product details »