Suspension Tools

1/4" T-handle Ball End Hex Wrench (Camber Plate Adjuster)

$ 10.00

This is the tool you need to adjust your camber plate bolts on some Vorshlag camber plate designs, including: E30 BMW, Subaru, Mini, and EVO. Made from heat treated Protanium...

View full product details »

Focus RS (3rd gen) Strut Tower Cutting Fixture (Tool)

$ 68.88

Vorshlag has long promoted that you can never have too much camber in your McPherson strut suspension. For the 3rd gen Focus (RS/ST/etc), which has 1000 pounds on each front...

View full product details »

MCS ASM Spring Perch and Lock Ring Wrenches (pair)

$ 46.00

Motion Control Suspension Wrenches for Spring Perches and Lock Rings (pair) This is a PAIR of pin wrenches used for tightening the locking collars and lower spring perches on Motion...

View full product details »

MCS Jam Nuts

$ 6.00

Motion Control Suspension Replacement Jam Nuts These are the jam nuts MCS uses to secure their pin style strut and shock shafts to top mounts. If you need a set,...

View full product details »

MCS Nitrogen Fill Tool and Gauge

$ 140.00

Motion Control Suspension Shock Pressure Gauge and Nitrogen Fill Tool This is a tool used to check the nitrogen pressure of MCS dampers. Along with a nitrogen rig it can...

View full product details »

MCS Remote Reservoir Mounts

$ 25.00

Motion Control Suspension Mounts For Remote Reservoir (single) This is a single set of parts used for mounting the remote reservoirs of Motion Control Suspension shocks and struts. It is...

View full product details »

Mini R53 Strut Tower Cutting Fixture (Tool)

$ 68.88

Vorshlag has long promoted that you can never have too much camber in your McPherson strut suspension. For the R53 Mini, which is front biased and puts over 800 pounds...

View full product details »

Mini R56 Strut Tower Cutting Fixture (Tool)

$ 68.88

Vorshlag has long promoted that you can never have too much camber in your McPherson strut suspension. For the R56 Mini, which is front biased and puts over 800 pounds...

View full product details »

Powerflex BMW and MINI Jack Adapter

$ 19.99

DescriptionThe Powerflex BMW & Mini jack pad adapter is designed to fit into the plastic lifting points found on your BMW and Mini. It helps with lift stability while protecting...

View full product details »

S197 Strut Tower Cutting Fixture (Tool)

$ 68.88

Vorshlag has long promoted that you can never have too much camber in your McPherson strut suspension. For the S197 Mustang, which has 1000 pounds on each front corner, this...

View full product details »

S550 Strut Tower Cutting Fixture (Tool)

$ 68.88

Vorshlag has long promoted that you can never have too much camber in your McPherson strut suspension. For the S550 Mustang, which has 1000 pounds on each front corner, this...

View full product details »

S550/S650 SPC Camber Arm Adjusting Wrench

$ 25.00

Vorshlag has long promoted that you can never have too much camber. For the S550 and S650 Mustang the SPC camber arms solve that issue. But, they are difficult to...

View full product details »

S650 Strut Tower Cutting Fixture (Tool)

$ 68.88

Vorshlag has long promoted that you can never have too much camber in your McPherson strut suspension. For the S650 Mustang, which has 1000 pounds on each front corner, this...

View full product details »

Vorshlag 68-75mm Spanner Wrenches for MCS and Moton Dampers (pair)

$ 50.00

Vorshlag 68-75mm Spanner Wrenches for MCS and Moton Dampers (pair) This is a PAIR of spanner wrenches used for tightening the locking collars and lower spring perches on Moton Clubsport...

View full product details »

VW Mk7 / MQB Strut Tower Cutting Fixture (Tool)

$ 68.88

Vorshlag has long promoted that you can never have too much camber in your McPherson strut suspension. For the MQB chassis Volkswagens and Audis, this is especially true. That's a...

View full product details »