Vorshlag has new hours:  8am-5pm CT

SPC Performance Front Camber Bolts for 2015+ S550 Mustang


Need even more front camber on your S550 than you can get with camber plates, these SPC eccentric bolts are the answer.

Make a two bolt strut adjustable up to ±1.75° camber with the EZCam™ from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change.

SPC's patented EZCams:
• Make camber changes a cost effective, quick one-person job without grinding
• SPC’s 12.9 grade bolt provides the best clamp load with the highest safety factor in the industry
• Use a Hex Chromate-free finish for 700 hr salt spray results vs the competitors’ ~20 hr, to avoid any hydrogen embrittlement issues, and to be environmentally friendly
• Have markings on the bolt head to show you where the lobe is for easy orientation during adjustment.

Sold as a pair for replacement of the upper 16mm bolt between the strut and spindle.

Front Adjustment range: Camber ±1.75°
Installation time: .4 hr/side
Required: 1 kit per axle

Applications:

2015-2023 Ford Mustangs (possibly 2024+)

We recommend the camber bolts be paired with the SPC rear camber arms, available here.