Vorshlag has new hours:  8am-5pm CT

Sparco Circuit QRT Fixed Back Racing Seat


The price includes shipping

Introduction

This is a very narrow seat. Double check the dimensions before ordering.

Updated with new QRT technology, the Circuit remains one of the most widely-used seats in Touring and Rally car racing. Available in 2 sizes (Circuit II size L is available on it's own page) it has an integrated DTC system, non-slip fabric to restrain the shoulders and seat, a new cushion divided into 2 parts and new stitching. Fixed using lateral fastenings with 290mm spacing.

 Weight:   Shell 15.9lbs (7200g)   Seat 18.7lbs (8500g)

Designed and developed in Italy by Sparco, QRT technology is destined to generate the world's lightest fiberglass frames and to define the features of the sports seats of the future. With this technology Sparco sets new standards of seat performance, reducing the unit weight by 30% compared to previous seats - enabling unprecedented mechanical strength/weight ratios in fiberglass sports seats.

The 2019 Circuit QRT is an ultra-light competition seat specifically designed for circuit use. Made from aramadic fiber-reinforced fiberglass with all-new QRT Technology, the Circuit QRT has an ultra-light shell. The Circuit QRT includes integrated bolsters to protect the head. This seat can be used with a Hans device for even greater protection. The ultra-light shell is then wrapped in an impact-absorbing and fire retardant fabric that helps hold the body. The Circuit QRT is FIA approved.

QRT TECHNOLOGY
QRT Technology gives an unparalleled mechanical strength/weight ratio for fiberglass composite racing seats. QRT Technology gives an average weight savings of 30% when compared to standard fiberglass technology. The main benefit is that QRT seats approach the weight of carbon fiber seat at the price of a fiberglass composite seat.

Like virtually all composite, fixed mount, FIA racing seats these are side-mount seats. This means you will need to purchase side mount brackets to begin to mount these into a car. We have had good results with OMP steel short side brackets, which we have listed in this same section. Even with those we frequently modify the side brackets to get seats low enough.

Most cars don't have a flat floor to bolt the side brackets to so we usually end up making adapter "sub-brackets" for the side mounts (with flat bottoms) to bolt to, so everything lines up with the chassis floor. Sometimes we will mount the anchors for the lap and/or anti-sub brackets to this sub-bracket. If you need to adjust the seat, low profile double-locking sliders are available.

Key Features

  • Side mounted only (brackets sold separately)
  • FIA Homologated to 8855-1999
  • QRT Technology – 30% Weight savings
  • Ultra-light aramadic fibers-reinforced fiberglass shell
  • Harness slots that can accommodate a wide range of drivers
  • Integrated head bolsters for greater safety
  • Hans device compatible
  • Fire retardant fabric
  • FIA approved

NOTES: We have set up economical shipping costs on these seats for the contiguous US. The drop down option covers the shipping costs.